Question

Common problems in the production of metal stamping drawing parts? What are the common problems in the production of metal stamping drawing parts: 1. The shape and size of the metal stamping drawing parts do not match the shape and size of the metal stamping drawing parts.

What is a special-shaped spring? A slight difference from conventional springs is that the springs are irregular, with bending and a large number of complicated angle designs. The manufacturing and processing techniques are relatively more demanding, and the equipment is also more demanding. Generally, it is wound

What are the protective layers of the spring? 　　For springs, people generally use electroplating to obtain the protective layer of Xin. It has the characteristics of non-corrosion and can also greatly improve the appearance of the spring. The performance of the spring has also been improved, for example, it

How are stamping parts formed? Stamping parts are formed by applying external force to plates, strips, pipes and profiles by means of presses and dies to produce plastic deformation or separation, so as to obtain workpieces (stamping parts) of the required shape and size. Stamping and forging are

What are the advantages of springs? What are the advantages of the spring? What are the advantages of springs?1. Relieve shock and absorb vibration: This kind of spring has great elastic deformation ability and can absorb vibration and shock. Such as buffer springs for automobiles and trains, and vibration-absorbing

What are the characteristics of stainless steel springs of different materials? 301 stainless steel spring:301 stainless steel spring is equivalent to piano wire in stainless steel. Elasticity and fatigue are much higher than the former two, which is very suitable for conventional stainless steel springs, such as springs

How to prevent the springs from being entangled The spring is an indispensable part, because the particularity of the shape is always entangled! Usually larger springs can be disassembled manually. However, the miniature spring cannot be disassembled manually. Many miniature springs are invisible to the naked eye, such as manual

What is the surface treatment function of torsion springs What are the surface treatment effects of torsion springs:(1) Protective atmosphere heat treatment. In my country, the heat treatment of torsion spring, oil quenched tempered steel wire and toughened steel with wire less than 15 mm adopts the heat

What is a compression spring? Compression Encyclopedia Compression spring is a kind of hardware fitting with spiral geometry formed by wire. Hardening and strengthening work are more difficult than flat hardware fittings. Related standards: GB/T_1239[1].2–2009_Technical conditions for cold rolled cylindrical spiral springs, GB/T2089–94, etc. Design and production of

What is the manufacturing method of the circlip? The manufacturing method of the circlip: In the mechanical design, the spring often bears the alternating load with impact, so the spring material should have high yield strength, fatigue strength, impact toughness and good heat treatment performance. Commonly used spring