Categories

Partial structure with hook tension spring

Partial structure with hook tension spring There are many ways to structure the hook part of the tension spring, and the more commonly used ones have been included in the national standard. The shape of the end of the tension spring is mainly shackles, which are formed by

How to deal with the failure of the compression spring?

How to deal with the failure of the compression spring? After the spring is formed, it is generally subjected to low-temperature stress removal annealing or blue treatment at 220-330°C, or according to the operating conditions of the spring and the characteristics of the selected material, it is necessary

Classification and functions of coil springs

Classification and functions of coil springs The coil spring is just an accumulator. It has the function of storing energy, but it cannot release the energy slowly. To complete the function of releasing slowly, it should be completed by “spring + large transmission ratio organization”, which is common in

How to deal with the failure of the compression spring?

How to deal with the failure of the compression spring? After the spring is formed, it is generally subjected to low-temperature stress removal annealing or blue treatment at 220-330°C, or according to the operating conditions of the spring and the characteristics of the selected material, it is necessary

The correct use of hardware springs

The correct use of hardware springs The correct use of hardware springs Core Tips: Please avoid the following improper use methods ⑴Exceeding the extremely large shrinkage amount (300,000 times condition, the application of the fittings tightly and long) occurs when the pressure occurs, which will cause breakage.